Effects of Asymmetric Cutter Tip Radii on Gear Tooth Root Bending Stress
By Dr. Abdullah Akpolat, Dr. Nihat Yildirim, Burak Sahin, Omer Yildirim, Bulent Karatas, and Fatih Erdogan Tooth root fillet is the […]
Induction Gear Hardening: Part 2
This is the second installment of a two-part article on induction hardening of gears and gear-like components. Part 1 was […]
Root Fillet Optimization of Gears with Asymmetric Teeth
By Dr. A.L. Kapelevich and Dr. Y.V. Shekhtman The Direct Gear Design method optimizes various parameters and elements of gear […]
Induction Gear Hardening
Over the years, gear manufacturers have increased their knowledge of the production of quality gears and gear-like components. This knowledge […]
Fatigue Performance and Cleanliness of Carburizing Steels for Gears
The cleanliness of steels used for gears is of great importance when looking to improve their life or increase loads. […]
Advanced Thermal Processing for Enhanced Gear Tribology
Abstract Vast empirical knowledge accumulated over centuries, in conjunction with recent advances in the areas of material science, tribology, and […]
An Experimental and Analytical Comparison of the Noise Generated by Gears of Austempered Ductile Iron (ADI) and Steel Materials
Over the years, there have been many claims made concerning the relative noise performance of austempered ductile iron (ADI) versus […]
