Simulation of Hobbing and Generation Grinding To Solve Quality and Noise Problems
Due to its high productivity and accuracy, generation manufacturing of gearing is widely used in gear production [1, 2]. When […]
Polish Grinding of Gears for Higher Transmission Efficiency
The established continuous generating method was used as the base technology for the polish grinding process, which is distinct from […]
Changing the Game with an Innovative Machine Concept: Dry Hard-Gear Finishing
Despite the many high-speed, high-torque direct-drive technologies developed over the past years, the overall efficiency of gearboxes is still state-of-the-art. […]
Molecular Decomposition Process = Electrochemical Assisted Precision Form Grinding
Introduction Molecular decomposition process is an electrochemical grinding process that has been refined to enable: • The removal of increased […]
GrindTalk: MIRA ICE – Cooler Grinding for Large Gears
Introduction PeripGear tooth profile grinding has traditionally been thought of as a slow process. Initially developed as a discontinuous generating […]
Advances in Abrasive Technology for Grinding Gears from Solid
Past reviews of the status of grinding for the gear industry have inevitably focused on the process as one of […]
Complex Form Grinding Technology for Advanced Abrasive Technology
The grinding industry is seeing major advances in abrasive technology and in the machine tool capabilities to enable this technology […]
Handling Twist
Specific and controlled handling of twist in profile grinding can solve production-related problems and simultaneously open new gear manufacturing doors. […]
Development of Novel CBN Grade for Electroplated Finish Grinding of Hardened Steel Gears
The grinding processes used in finish grinding of hardened gears can be classified as generating grinding and profile grinding, depending […]
Continuous Generating Gear Grinding
In order to improve load carrying capacity and noise behavior, case hardened gears usually are hard finished [1]. One possible […]
The Case for Grinding Perfection
In The French company ZF Bouthéon has a long history as a manufacturer of truck transmissions. The company has been […]
A Grinding Solution
A company approached Ontario Drive & Gear (ODG) concerning a problem they were experiencing with a gear set used in […]
Grinding Large Module Gears
This article reviews the technologies, products, and factors leading to the transformation of gear production for parallel-axis gears 400 mm […]
New Gains in Grinding Pinions
The demand for lower costs and higher flexibility are shaping modern production more than ever before. Mechanical engineering companies are […]
Grinding Internal Planetary Gears
Recently, various articles regarding planetary gear systems have been written and published in magazines such as Gear Solutions. In the […]
Next Generation Gear Grinding
What do the gears that end up in trains, wind generators, speed reducers, marine transmissions, off-road equipment, and printing presses […]
Stress in Diamond-Coated Cutting Tools
Diamond coatings have been increasingly used in cutting-tool applications. Coating delamination is the major tool failure mode and occurs due […]
Surface Hardening: Hard Turning or Grinding?
Hard turning and grinding are competing finishing processes for the manufacture of precision mechanical components such as bearings, gears, cams, […]
Gaining the Edge in CBN Tool Performance
Users of “superhard” materials such as CBN (cubic boron nitride) in cutting tools commonly believe that chamfering — also known […]
New Links in the Production Chain
The form grinding process has dramatically increased the efficiency of gear grinding machines, and consequently the productivity of gear shops. […]
