Home Services Maintenance/Repair

Maintenance/Repair

Micro Surface Corporation

Micro Surface Corporation started out in 1919 as Timesaver Products Company Inc., makers of TimeSaver Lapping Compounds. It served manufacturers […]

Colonial Tool Group, Inc.

Colonial Tool Group, Inc., has been in the machine tool business for over 70 years. We were previously owned by […]

Broaching Machine Specialties

THE BMS WAY The BMS Way means the customer is at the center of the process at every step of […]

Comparison of Tooth Interior Fatigue Fracture Load Capacity to Standardized Gear Failure Modes

Introduction Gears are case hardened to produce residual stresses at the surface — improving wear resistance, bending fatigue, and contact […]

The Internet of Gears: New Perspectives Through CMS

During the past decades, the capacity of production machinery increased continuously in nearly all industries. A doubling of the capacity […]

Impact of Surface Condition and Lubricant on Effective Gear Tooth Friction Coefficient

The impact of gear tooth surface roughness and advanced coatings on frictional losses in a gear mesh is of significant […]

Developing an Energy-Efficient Industrial Gear Oil

Gearboxes found in mining and manufacturing sectors encounter a variety of harsh conditions. Heavy loading, longer duty cycles, and high […]

Pitch Factor Analysis for Symmetric and Asymmetric Tooth Gears

In comparison with traditional gear design based on pre-selected, typically standard generating rack parameters and its addendum modification also known […]

Application of Advanced Mesh Analysis To Eliminate Pinion Failures

Through a case study involving pinion failures on plastic extruder drives, this paper covers failure analysis, gear rating review, application […]

Accelerated Testing and Temperature Calculation of Plastic Gears

Plastic gears have been in use since the 1950s, and their popularity has increased significantly in the last few years. […]

Five Ways To Extend CNC Spindle Life for Gear Manufacturing

For most manufacturers, including those that produce gears, the productivity of their CNC equipment can be measured in fractions of […]

Calculating the Risk of Micropitting Using ISO Technical Report 15144-1:2014 – Validation with Practical Applications

For high-performance gear transmissions, case-carburized and ground gears are used in most cases. International standards have been developed to provide […]

Polymer Composite Bases for Machine Foundations

A properly designed base foundation is crucial to the success and longevity of the machine. Designers have historically resorted to […]

A New Class of Industrial Gear Oil

In 2013, the global lubricant market was just over 40 million tons, comprised of 58-percent automotive lubricants and 42-percent industrial […]

Analysis and Optimization of Asymmetric Epicyclic Gears

The design objective of asymmetric tooth gears is to improve performance of the primary drive flank profiles at the expense […]

The Benefits of Asymmetric Gears

Gear wheels often rotate in only one  direction throughout their entire service lives. This applies particularly in the case of […]

An Experimental Evaluation of the Procedures of the ISO/TR 15144 Technical Report for the Prediction of Micropitting

Recently, ISO 15144 [1] has been approved by ISO as a technical report that presents an analysis procedure, which is […]

Prediction of Airborne Radiated Noise from Lightly Loaded Lubricated Meshing Gear Teeth

Automotive transmission gear noise has received increased attention in recent years. The phenomenon is considered as a major noise source […]

The Impact of Surface Condition and Lubricant on Gear Tooth Friction

The most exhaustive experimental study quantifying gear tooth friction is by Yoshizaki [1], in which spur gears with various geometries […]

Application of a Unique Anti-Wear Technology — Ion-Sulfurized Lubricating Gradient Material

History Of Ion-Sulfurized Lubricating Gradient Material (LGM) Technology In modern industry, large fraction of machinery components, including gears, splines, and […]

Related Articles

X