New TesaStar Probes from Brown & Sharpe

0
1151

TesaStarÆ Touch Trigger Probes from Brown & Sharpe Tesa feature an adjustable measuring force to prevent inadvertent triggering when a long stylus is used. Probe trigger force can be easily adjusted using the hexagonal wrench supplied with it. Clockwise rotation increases the trigger force by 0.1 N to approximately 0.3 N. The probe force is pre-set at the factory to 0.11 N, based on using a 21 mm (0.82 in.) long stylus fitted with a 3 mm (0.11 in.) diameter ball tip.

TesaStar probes are available in two configurations, the TesaStar and the TesaStar-IÆ Indexable Touch Trigger Probe. The TesaStar-i is adjustable to 168 positions in 15-degree increments. Probe and head are combined into a single unit for durability. Its compact size effectively increases the working volume of mid-sized coordinate measuring machines.

The TesaStar and TesaStar-i probes are designed to provide the efficiency of a motorized probe in a manual system and can be mounted on any coordinate measuring machine. Either is supplied with the new Tesa Micro-HiteÆ 3D coordinate measuring system. TesaStar probes can be rotated through an infinite number of positions for complete flexibility in measuring complex components. They do not require special software, cabling, electronics, or special operator training.

For more information contact Brown & Sharpe Tesa at (800) 283-3600. Visit online at [www.brownandsharpe.com].