Bore-Rx Internal Deburring Brushes from Weiler

0
2729

Weiler Corporation, the leading manufacturer of power and abrasive nylon brushes for the manufacturing industry, will be exhibiting the Bore-Rx™ line of internal deburring brushes at IMTS booth #B-7226. Designed to increase productivity of in-machine deburring in CNC machining centers, the Bore-Rx brushes easily remove all burrs found at intersecting holes and other internal edges of the work-piece and can also be used for bore finishing applications.

The Bore-Rx brushes provide a solution to the problem of removing internal edge burrs, which is often met using inefficient tube or “bottle” brushes. Tube brushes have several shortcomings but most notable is their lack of filament density, which determines aggression and life. Bore-Rx brushes, however, have 10 times more filament density allowing them to remove even well attached burrs and boast an expanded lifespan. Further, tube brushes cannot be operated at high RPMs and are prone to untwist when used in both directions of spindle rotation. Bore-Rx brushes correct these disadvantages by operating at high RPMs and rotating in both directions.

By using Bore-Rx brushes off-hand deburring is eliminated, resulting in a decrease of direct labor content and increase in part-to-part consistency. Available in sizes ranging from 3/4” to 4” in either wire or abrasive nylon filament, the Bore-Rx brushes can be adapted for use in end mill holders or can be mounted using 3/8” collets.

For more information call (800) 835-9999 or visit [www.weilercorp.com].